a1200   NEWS   APPS   DOCS   ABOUT
a1200
----
a1200
----
Autodocs
Include
 classes
 clib
 datatypes
 devices
 diskfont
 dos
 exec
 gadgets
 graphics
 hardware
 images
 intuition
 libraries
 pragma
 pragmas
 prefs
 proto
 reaction
 resources
  battclock.h / .i
  battmem.h / .i
  battmembitsamiga.h / .i
  battmembitsamix.h / .i
  battmembitsshared.h / .i
  card.h / .i
  cia.h / .i
  ciabase.h / .i
  disk.h / .i
  filesysres.h / .i
  mathresource.h / .i
  misc.h / .i
  potgo.h / .i
 rexx
 utility
 workbench
GuruMeditation
Docs » Include » resources » card.h / .i
#ifndef	RESOURCES_CARD_H
#define RESOURCES_CARD_H 1

/*
**	$VER: card.h 1.11 (14.12.1992)
**	Includes Release 45.1
**
**	card.resource include file
**
**	(C) Copyright 1991-2001 Amiga, Inc.
**	    All Rights Reserved
**
*/
#ifndef	EXEC_TYPES_H
#include <exec/types.h>
#endif

#ifndef	EXEC_NODES_H
#include <exec/nodes.h>
#endif

#ifndef	EXEC_INTERRUPTS_H
#include <exec/interrupts.h>
#endif

#define CARDRESNAME	"card.resource"

/* Structures used by the card.resource				*/

struct	CardHandle {
	struct Node cah_CardNode;
	struct Interrupt *cah_CardRemoved;
	struct Interrupt *cah_CardInserted;
	struct Interrupt *cah_CardStatus;
	UBYTE	cah_CardFlags;
};

struct	DeviceTData {
	ULONG	dtd_DTsize;	/* Size in bytes		*/
	ULONG	dtd_DTspeed;	/* Speed in nanoseconds		*/
	UBYTE	dtd_DTtype;	/* Type of card			*/
	UBYTE	dtd_DTflags;	/* Other flags			*/
};

struct	CardMemoryMap {
	UBYTE	*cmm_CommonMemory;
	UBYTE	*cmm_AttributeMemory;
	UBYTE	*cmm_IOMemory;

/* Extended for V39 - These are the size of the memory spaces above */

	ULONG	cmm_CommonMemSize;
	ULONG	cmm_AttributeMemSize;
	ULONG	cmm_IOMemSize;

};

/* CardHandle.cah_CardFlags for OwnCard() function		*/

#define	CARDB_RESETREMOVE	0
#define CARDF_RESETREMOVE	(1<<CARDB_RESETREMOVE)

#define	CARDB_IFAVAILABLE	1
#define	CARDF_IFAVAILABLE	(1<<CARDB_IFAVAILABLE)

#define CARDB_DELAYOWNERSHIP	2
#define CARDF_DELAYOWNERSHIP	(1<<CARDB_DELAYOWNERSHIP)

#define CARDB_POSTSTATUS	3
#define CARDF_POSTSTATUS	(1<<CARDB_POSTSTATUS)

/* ReleaseCreditCard() function flags				*/

#define	CARDB_REMOVEHANDLE	0
#define	CARDF_REMOVEHANDLE	(1<<CARDB_REMOVEHANDLE)

/* ReadStatus() return flags					*/

#define	CARD_STATUSB_CCDET		6
#define CARD_STATUSF_CCDET		(1<<CARD_STATUSB_CCDET)

#define CARD_STATUSB_BVD1		5
#define	CARD_STATUSF_BVD1		(1<<CARD_STATUSB_BVD1)

#define CARD_STATUSB_SC			5
#define CARD_STATUSF_SC			(1<<CARD_STATUSB_SC)

#define CARD_STATUSB_BVD2		4
#define	CARD_STATUSF_BVD2		(1<<CARD_STATUSB_BVD2)

#define CARD_STATUSB_DA			4
#define CARD_STATUSF_DA			(1<<CARD_STATUSB_DA)

#define CARD_STATUSB_WR			3
#define	CARD_STATUSF_WR			(1<<CARD_STATUSB_WR)

#define CARD_STATUSB_BSY		2
#define CARD_STATUSF_BSY		(1<<CARD_STATUSB_BSY)

#define CARD_STATUSB_IRQ		2
#define CARD_STATUSF_IRQ		(1<<CARD_STATUSB_IRQ)

/* CardProgramVoltage() defines */

#define CARD_VOLTAGE_0V		0	/* Set to default; may be the same as 5V */
#define CARD_VOLTAGE_5V		1
#define CARD_VOLTAGE_12V	2

/* CardMiscControl() defines */

#define	CARD_ENABLEB_DIGAUDIO	1
#define	CARD_ENABLEF_DIGAUDIO	(1<<CARD_ENABLEB_DIGAUDIO)

#define	CARD_DISABLEB_WP	3
#define	CARD_DISABLEF_WP	(1<<CARD_DISABLEB_WP)

/*
 * New CardMiscControl() bits for V39 card.resource.  Use these bits to set,
 * or clear status change interrupts for BVD1/SC, BVD2/DA, and BSY/IRQ.
 * Write-enable/protect change interrupts are always enabled.  The defaults
 * are unchanged (BVD1/SC is enabled, BVD2/DA is disabled, and BSY/IRQ is enabled).
 *
 * IMPORTANT -- Only set these bits for V39 card.resource or greater (check
 * resource base VERSION)
 *
 */

#define	CARD_INTB_SETCLR	7
#define	CARD_INTF_SETCLR	(1<<CARD_INTB_SETCLR)

#define	CARD_INTB_BVD1		5
#define	CARD_INTF_BVD1		(1<<CARD_INTB_BVD1)

#define	CARD_INTB_SC		5
#define	CARD_INTF_SC		(1<<CARD_INTB_SC)

#define	CARD_INTB_BVD2		4
#define	CARD_INTF_BVD2		(1<<CARD_INTB_BVD2)

#define	CARD_INTB_DA		4
#define	CARD_INTF_DA		(1<<CARD_INTB_DA)

#define	CARD_INTB_BSY		2
#define	CARD_INTF_BSY		(1<<CARD_INTB_BSY)

#define	CARD_INTB_IRQ		2
#define	CARD_INTF_IRQ		(1<<CARD_INTB_IRQ)


/* CardInterface() defines */

#define	CARD_INTERFACE_AMIGA_0	0

/*
 * Tuple for Amiga execute-in-place software (e.g., games, or other
 * such software which wants to use execute-in-place software stored
 * on a credit-card, such as a ROM card).
 *
 * See documentatin for IfAmigaXIP().
 */

#define	CISTPL_AMIGAXIP	0x91

struct	TP_AmigaXIP {
	UBYTE	TPL_CODE;
	UBYTE	TPL_LINK;
	UBYTE	TP_XIPLOC[4];
	UBYTE	TP_XIPFLAGS;
	UBYTE	TP_XIPRESRV;
	};
/*

	; The XIPFLAGB_AUTORUN bit means that you want the machine
	; to perform a reset if the execute-in-place card is inserted
	; after DOS has been started.  The machine will then reset,
	; and execute your execute-in-place code the next time around.
	;
	; NOTE -- this flag may be ignored on some machines, in which
	; case the user will have to manually reset the machine in the
	; usual way.

*/

#define	XIPFLAGSB_AUTORUN	0
#define XIPFLAGSF_AUTORUN	(1<<XIPFLAGSB_AUTORUN)

#endif	/* RESOURCES_CARD_H */

Comments

Name:
E-mail: Use this if you want a message if you get a response, will not be shown.
Comment:
Select correct short for:

Anthrox

DJ
TRSI
TSL
ATX

Comments:

$VER: d0.se 1.14 Copyright © 2011-2024 Tobias Geijersson support at d0 dot se