a1200   NEWS   APPS   DOCS   ABOUT
Docs » Autodocs » narrator.device » OpenDevice


	OpenDevice - opens the narrator device.


	error = OpenDevice("narrator.device",  unit, IORequest, flags);
D0 A0 D0 A1 D1


	The OpenDevice routine grants access to the narrator device.
OpenDevice checks the unit number, and if non-zero, returns an
error (ND_UnitErr). If this is the first time the driver has
been opened, OpenDevice will attempt to open the audio device
and allocate the driver's static buffers. If either of these
operations fail, an error is returned. See the .h and .i
include files for possible error return codes. Next, OpenDevice
(done for all opens, not just the first one) initializes various
fields in the user's IORequest block (see below). If users wish
to use non-default values for these parms, the values must be set
after the open is done. OpenDevice also assigns a pseudo unit
number to the IORB for use in synchronizing read and write requests.
See the read command for more details. Finally, OpenDevice stores
the device node pointer in the IORequest block and clears the
delayed expunge bit.
***** NEW FOR V37 NARRATOR *****
Several new fields in the IORequest block have been added for V37
narrator. These fields are initialized when the device is opened
if the NDB_NEWIORB bit is set in the flags field of the user's
IORequest block. Note that NDB_NEWIORB is set in the IORequest
block, NOT in the "flags" input parm to the OpenDevice call.


	device     - "narrator.device"
unit - 0
IORequest - Pointer to the user's IORequest block
flags - 0


	The narrator device will initialize the IORequest block as follows
(assume IORB points to the IOrequest block):
IORB->rate = 150; /* Speaking rate in words/minute */
IORB->pitch = 110; /* Baseline pitch in Hertz */
IORB->mode = NATURALF0; /* Pitch (F0) mode */
IORB->sex = MALE; /* Sex of voice */
IORB->volume = 64 /* Volume, full on */
IORB->sampfreq = 22200 /* Audio sampling freq */
IORB->mouths = 0 /* Don't generate sync events */
and if the NDB_NEWIORB bit is set:
IORB->F0enthusiasm = 0 /* F0 excursion factor */
IORB->F0perturb = 32 /* F0 perturbation (in 32nds) */
IORB->F1adj = 0 /* F1 adjustment in 5% steps */
IORB->F2adj = 0 /* F2 adjustment in 5% steps */
IORB->F3adj = 0 /* F3 adjustment in 5% steps */
IORB->A1adj = 0 /* A1 adjustment in decibels */
IORB->A2adj = 0 /* A2 adjustment in decibels */
IORB->A3adj = 0 /* A3 adjustment in decibels */
IORB->articulate = 100 /* Transition time multiplier */
IORB->centralize = 0 /* Degree of vowel centralization */
IORB->centphon = "" /* Pointer to central ASCII phon */
IORB->AVbias = 0 /* AV bias */
IORB->AFbias = 0 /* AF bias */
IORB->priority = 100 /* Priority while speaking */


The include files contain the complete IORequest block definition, default settings, and error return codes., Exec input/output documentation.


E-mail: Use this if you want a message if you get a response, will not be shown.
Select correct short for:




$VER: d0.se 1.14 Copyright © 2011-2024 Tobias Geijersson support at d0 dot se